close
ISO R594 | Conical fittings for syringes, needles and other medical equipment |
ISO 594/1 | Conical fittings with a 6% (Luer) taper for syringes, needles and other medical equipment-- Part 1: General requirements |
ISO 594-2 | Conical fittings with a 6% (Luer) taper for syringes, needles and other medical equipment-- Part 2: Lock fittings |
ISO 780 | Packaging-Pictorial marking for handling of goods |
ISO 1219 | Fluid power systems and components-Graphic symbols |
ISO 1797-1 | Dental rotary instruments--Shanks Part 1: Shanks made of metals |
ISO 2859-0 | Sampling procedures for inspection by attributes Part 0: Introduction to the ISO 2859 attribute sampling system |
ISO 2859-1 | Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
ISO 2859-2 | Sampling procedures for inspection by attributes Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
ISO 2859-3 | Sampling procedures for inspection by attributes Part 3: Skip-lot sampling procedures |
ISO 2859-4 | Sampling procedures for inspection by attributes Part 4: Procedures for assessment of stated quality levels |
ISO 3040 | Technical drawings--Dimensioning and tolerancing-- Cones |
ISO 3696 | Water for analytical laboratory use--Specification and test methods |
ISO 3746 | Acoustics-Determination of sound power levels of noise sources using sound |
ISO 3964 | Dental handpieces - Coupling dimensions |
ISO 5356-1 | Anesthetic and respiratory equipment-Conical connectors Part 1: cones and sockets |
ISO 5367 | Breathing tubes intended for use with anaesthetic apparatus and ventilators |
ISO 5457 | Technical drawings-Sizes and layout of drawing sheets |
ISO 5725-2 | Accuracy of measurement methods and results, Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 5941 | Compressors, pneumatic tools and machines--Preferred pressures |
ISO 6009 | Hypodermic needles for single use--Color coding for identification |
ISO 6360-1 | Dental rotary instruments- Number coding system Part 1: General characteristics |
ISO 6440 | Wheelchairs-Nomenclature, terms and definitions |
ISO 6710 | Single-use containers for venous blood specimen collection |
ISO 7000 | Graphical symbols for use on equipment-Index and synopsis |
ISO 7176-1 | Wheelchairs-- Part 1: Determination of static stability |
ISO 7176-2 | Wheelchairs-- Part 2: Determination of dynamic stability of electric wheelchairs |
ISO 7176-3 | Wheelchairs-- Part 3: Determination of efficiency of brakes |
ISO 7176-4 | Wheelchairs-- Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
ISO 7176-5 | Wheelchairs-- Part 5: Determination of overall dimensions, mass and turning space |
ISO 7176-6 | Wheelchairs-- Part 6: Determination of maximum speed, acceleration and retardation of electric wheelchairs |
ISO 7176-7 | Wheelchairs-- Part 7: Measurement of seating and wheel dimensions |
ISO 7176-8 | Wheelchairs-- Part 8: Requirements and test methods for static, impact and fatigue strengths |
ISO 7176-9 | Wheelchairs-- Part 9: Climatic tests for electric wheelchairs |
ISO 7176-10 | Wheelchairs-- Part 10: Determination of obstacle-climbing ability of electric wheelchairs |
ISO 7176-11 | Wheelchairs-- Part 10: Determination of obstacle-climbing ability of electric wheelchairs |
ISO 7176-13 | Wheelchairs--Part 13: Determination of coefficient of friction of test surfaces |
ISO 7176-14 | Wheelchairs--Part 14: Power and control systems for electric wheelchairs- Requirements and test methods |
ISO 7176-15 | Wheelchairs-- Part 15: Requirements for information disclosure, documentation and libeling |
ISO 7176-16 | Wheelchairs-- Part 16: Resistance to ignition of upholstered parts-- Requirements and test methods |
ISO 7176-19 | Wheelchairs-- Part 19: Wheeled mobility devices for use in motor vehicles |
ISO 7176-22 | Wheelchairs-- Part 22: Set-up procedures |
ISO 7176-23 | Wheelchairs-- Part 23: Requirements and test methods for attendant-operated stair-climbing devices |
ISO 7376-1 | Laryngoscopic fittings-- Part 1: Conventional hook-on type handle-blade fittings |
ISO 7376-2 | Laryngoscopic fittings-- Part 2: Miniature electric lamps--Screw threads and sockets for conventional blades |
ISO 7376-3 | Laryngoscopic fittings-- Part 3: Fiber-illuminated re-usable rigid laryngoscopes |
ISO 7193 | Wheelchairs-Maximum overall dimensions |
ISO 7711-1 | Dental rotary instruments- Diamond instruments Part 1: Dimensions, requirements, marking and packaging |
ISO 7864 | Sterile hypodermic needles for single use |
ISO 7785-1 | Dental handpieces-- Part 1: High-speed air turbine handpieces |
ISO 7785-2 | Dental handpieces-- Part 2: Straight and geared angle handpieces |
ISO 7886-1 | Sterile hypodermic needles for single use Part 1: Syringes for manual use |
ISO 7886-2 | Sterile hypodermic needles for single use Part 2: Syringes for use with power-driven syringe pumps |
ISO 7930 | Wheelchairs--Type classification based on appearance characteristics |
ISO 8320 | Optics and optical instruments--contact lenses--vocabulary and symbols |
ISO 8320-1 | Contact lenses and conact lens care products--Vocabulary Part 1: Contact lenses |
ISO 8320-2 | Contact lenses and conact lens care products--Vocabulary Part 2: Contact lens care products |
ISO 8321-1 | Optics and optical instruments--contact lenses Part 1: specification for rigid corneal and sclera contact lenses |
ISO 8321-2 | Optics and optical instruments--contact lenses Part 2: Specifications for single-vision hydrogen contact lenses |
ISO 8382 | Resuscitators intended for use with humans |
ISO 8536-1 | Infusion equipment for medical use-- Part 1 : Infusion glass bottles |
ISO 8536-2 | Infusion equipment for medical use-- Part 2 : Closures for infusion bottles |
ISO 8536-3 | Infusion equipment for medical use-- Part 3 : Aluminium caps for infusion bottles |
ISO 8536-4 | Infusion equipment for medical use-- Part 4 : Infusion sets for single use, gravity feed |
ISO 8536-5 | Infusion equipment for medical use-- Part 5 : Burette type infusion sets |
ISO 8536-6 | Infusion equipment for medical use-- Part 6 : Freeze drying closures for infusion bottles |
ISO 8536-7 | Infusion equipment for medical use-- Part 7 : Caps made of aluminium--plastics combinations for infusion bottles |
ISO 8537 | Sterile single-use syringes, with or without needle, for insulin |
ISO 8599 | Optics and optical instruments--Contact lenses-Determination of the spectral and luminous transmittance |
ISO 8601 | Data elements and interchange formats--Information interchange--representation of dates and times |
ISO 8980-1 | Ophthalmic optics--finished single-vision corrective lenses-- Part 1: General requirements |
ISO 8980-2 | Ophthalmic optics-- Uncut finished spectacle lenses Part 2: Specifications for progressive power lenses |
ISO 9000 | Quality management systems- Fundamentals and vocabulary |
ISO 9000-4 | Quality management and quality assurance standards- |
ISO 9001 | Quality management systems- Requirements |
ISO 9004 | Quality management systems - Guidelines for performance improvements |
ISO 9004-1 | Quality management and quality system elements-- Part 1: Guidelines |
ISO 9004-2 | Quality management and quality system elements-- Part 2: Guidelines for services |
ISO 9004-3 | Quality management and quality system elements-- Part 3: Guidelines for processed materials |
ISO 9004-4 | Quality management and quality system elements-- Part 4: Guidelines for quality improvement |
ISO 9168 | Dental handpieces-- Hose connectors |
ISO 9336-1 | Optics and optical instruments--Optical transfer function--application Part 1: Interchangeable lenses for 35mm still cameras |
ISO 9336-2 | Optics and optical instruments--Optical transfer function--application Part 2: Lenses for office copiers |
ISO 9336-3 | Optics and optical instruments--Optical transfer function--application Part 3: Telescopes |
ISO 9338 | Optics and optical instruments-contact lenses-determination of the diameters |
ISO 9339-1 | Optics and optical instruments-contact lenses-determination of the thickness Part 1: rigid contact lenses |
ISO 9340 | Optics and optical instruments-contact lenses-determination of strains for rigid contact lenses |
ISO 9341 | Optics and optical instruments-contact lenses-determination of inclusions and surface imperfections for rigid contact lenses |
ISO 9342 | Optics and optical instruments--Test lenses for calibration of foci meters |
ISO 9360-1 | Anaesthetic and respiratory equipment--Heat and moisture exchangers (HMEs) for humidifying respired gases in humans- Part 1: HMEs for use with minimum tidal volumes of 250ml |
ISO 9360-2 | Anaesthetic and respiratory equipment--Heat and moisture exchangers (HMEs) for humidifying respired gases in humans- Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250ml |
ISO 9363-1 | Optics and optical instruments--Contact lenses- Determination of cytotoxicity of contact lens material |
ISO 9614-1 | Acoustics-Determination of sound power levels of noise sources using sound. Part 1: Measurement at discrete points |
ISO 9626 | Stainless steel needle tubing for manufacture of medical devices |
ISO 9680 | Dental operating light |
ISO 9687 | Dental equipment-- Graphical symbols |
ISO 9913-1 | Optics and optical instruments- contact lenses Part 1: Determination of oxygen permeability and transmissibility by the FATT method |
ISO 9914 | Optics and optical instruments- contact lenses-- Determination of refractive index of contact lens materials |
ISO 9919 | Medical electrical equipment--Particular requirements for the basic safety and essential performance pulse oximeters requirement for medical use |
ISO 9999 | Technical aids for disabled persons Classification |
ISO 10005 | Quality management- Guidelines for quality plans |
ISO 10006 | Quality management- Guidelines to quality in project management |
ISO 10007 | Quality management- Guidelines for configuration management |
ISO 10012-1 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
ISO 10012-2 | Quality assurance requirements for measuring equipment Part 2: Guidelines for control of measurement processes |
ISO 10013 | Guidelines for developing quality manuals |
ISO 10014 | Guidelines for managing the economics of quality |
ISO 10015 | Quality management- Guidelines for training |
ISO 10017 | Guidance on statistical techniques for ISO 9001:1994 |
ISO 10079-1 | Medical suction equipment Part 1: electrically powered suction equipment--Safety requirements |
ISO 10079-2 | Medical suction equipment Part 2: Manually powered suction equipment |
ISO 10079-3 | Medical suction equipment Part 3: Suction equipment powered from vacuum or pressure source |
ISO 10338 | Optics and optical instruments- contact lenses- determination of curvature |
ISO 10339 | Ophthalmic optics--contact lenses--Determination of water content of hydrogel lenses |
ISO 10322-1 | Ophthalmic optics--Semi-finished lens blanks Part 1: specifications for single-vision and multifocal lens blanks |
ISO 10340 | Optics and optical instruments- contact lenses-- Method for determining the extractable substances |
ISO 10344 | Optics and optical instruments- contact lenses- saline solution for contact lens testing |
ISO 10725 | General requirements for the competence of testing and calibration laboratories |
ISO 10993-1 | Biological evaluation of medical devices- Part 1: evaluation and testing |
ISO 10993-3 | Biological evaluation of medical devices- Part 3: test for genotoxicity carcinogenicity and reproductive toxicity |
ISO 10993-4 | Biological evaluation of medical devices- Part 4: Selection of tests for interactions with blood. |
ISO 10993-5 | Biological evaluation of medical devices- Part 5: test for in vitro cytotoxicity |
ISO 10993-7 | Biological evaluation of medical devices- Part 7: Ethylene oxide sterilization residuals |
ISO 10993-10 | Biological evaluation of medical devices- Part 10: Tests for irritation and delayed-type hypersensitivity |
ISO 10993-11 | Biological evaluation of medical devices- Part 11: Tests for systemic toxicity |
ISO 11134 | Sterilization of health care products--Requirements for validation and routine control-- Industrial moist heat sterilization |
ISO 11135 | Medical devices--Validation and routine control of ethylene oxide sterilization |
ISO 11137 | Sterilization of health care products--Requirements for validation and routine control--Radiation sterilization |
ISO 11137-1: 2006 | Sterilization of health care products--Requirements for validation and routine control--Radiation sterilization |
ISO 11137-2: 2006 | Sterilization of health care products--Radiation--Establishing the sterilization dose |
ISO 11137-3: 2006 | Sterilization of health care products--Radiation-- Guidance for dosimetric aspects |
ISO 11199-1 | Walking aids manipulated by both arms-- Requirements and test methods--- Part 1: Walking frames |
ISO 11199-2 | Walking aids manipulated by both arms-- Requirements and test methods--- Part 2: Rollator |
ISO 11987 | Ophthalmic optics--contact lenses--Determination of shelf-life |
ISO 12864 | Ophthalmic optics-- contact lenses- determination of scattered light |
ISO 13402 | Surgical and dental hand instruments--Determination of resistance against autoclaving, corrosion and thermal exposure |
ISO 13485 | Quality systems- Medical devices- Particular requirements for the application of ISO 9001 |
ISO13485 ( 2000 : Draft ) | Quality management systems- Medical devices- System requirements for regulatory purposes |
ISO13485 ( 2003/07/15 ) | Medical devices--Quality management systems--Requirements for regulatory purposes |
ISO 14001 | Environmental management systems--Specification with guidance for use |
ISO 14155 | Clinical investigation of medical devices |
ISO 14534 | Ophthalmic optics-Contact lenses and contact lens care products-fundamental requirements |
ISO 14602 | Non-active surgical implants---Implants for Osteosynthesis Particular requirements |
ISO 14630 | Non-active surgical implants---General requirements |
ISO 14889 | Ophthalmic optics-Spectacle lenses-Fundamental requirements for uncut finished lenses |
ISO 14969 | Quality systems-Medical devices- Guidance on the application of ISO 13485 and ISO 13488 |
ISO 14971: 2003 | Medical devices---Application of risk management to medical devices |
ISO 14971: 2007 | Medical devices---Application of risk management to medical devices |
ISO 15197 | In vitro diagnostic test systems-- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
ISO 15223 | Medical devices-- Symbols to be used with medical device labels, labeling and information to be supplied |
ISO / TS 16949 | Particular requirements for the application of ISO 9001: 2000 for automotive production and relevant service part organizations |
ISO 17025 | General requirements for the competence of testing and calibration laboratories |
ISO 17511 | In vitro diagnostic medical devices-- Measurement of quantities in biological samples -- Metrological traceability of values assigned to calibrators and control materials |
ISO 17664 | Sterilization of medical devices-- Information to be provided by the manufacturer for the processing of resterilizable medical devices |
ISO 17799 | Information technology-Code of practice for information security management |
ISO 19011 | Guidelines for quality and/or environmental management systems auditing |
ISO 21647 | Medical electrical equipment--Particular requirements for the basic safety and essential performance of respiratory gas monitors |
ISO 22000 | Food safety management systems-- Requirements for any organization in the food chain |
ISO 22716 | Cosmetics-- Guideline on Good Manufacturing Practices |
全站熱搜
留言列表